Library · Stock / inventory · How to run this
Metal-detect reject is not tablet compress reject
Metal-detect rejects ÷ batch units make reject %. Type both.
Pair: Metal-detect reject rate on Stock. Compress: tablet compress reject rate. Scrap: packaging scrap rate.
What you type
Metal-detect rejects — Units rejected at metal detect in the Vitaquest window.
Batch units — Batch units run through that same window.
Reject % = metal-detect rejects ÷ batch units × 100. Fix feed / line hygiene when reject % is fat — do not invent a reject chip.
What not to do
Do not invent reject %. Do not mix compress rejects into metal-detect counts. Do not treat packaging scrap as metal-detect reject. Do not average every SKU when one owns the hole.
Related: Stock, tablet compress reject rate, packaging scrap rate, allergen rework rate.
Procedure
- Type metal-detect rejects and batch units.
- Read reject %.
- Fix feed / line hygiene when reject % is material.
Failure modes
- Inventing reject %.
- Mixing compress rejects into metal-detect counts.
- Treating packaging scrap as metal-detect reject.
Worked example
None on this page yet. When one lands it will be a real case: what broke, the number, and what changed. Not a composite.
Glossary
- Metal-detect reject rate %
- Metal-detect rejects ÷ Batch units × 100.
Work with us — We run this job on your accounts. Services
FAQ
- Is this tablet compress reject rate?
- Sibling Vitaquest grain. [Tablet compress reject rate](/manuals/vitaquest-tablet-compress-reject-rate) is compress rejects ÷ runs. This page is metal-detect rejects ÷ batch units.
- Is this packaging scrap rate?
- Related plant waste. [Packaging scrap rate](/manuals/vitaquest-packaging-scrap-rate) is scrap ÷ batch. This page is metal-detect reject rate.
- What reject % should I invent?
- None. Type metal-detect rejects and batch units from the same Vitaquest window.