Library · Stock / inventory · How to run this
NutraScience coating reject is not Vitaquest coating reject
Tally coating rejects against lots coated in one NutraScience QC cut. That tally is reject %.
Pair: Coating-reject rate on Stock. Other CMO: Vitaquest coating-reject. Sieve twin: particle-size fail.
What you type
Coating rejects — Lots that failed NutraScience coating release in the cut.
Batches — Lots that ran coating in that same NutraScience cut.
Reject % = coating rejects ÷ lots coated × 100. When reject % runs hot, chase spray weight or cure hold — never invent a reject chip.
What not to do
Skip inventing reject %. Skip dumping a Vitaquest coat-pan unit log into NutraScience fields. Skip folding particle-size misses into coating rejects. Skip averaging every SKU when one lot owns the scrap.
Related: Stock, Vitaquest coating-reject, particle-size fail, moisture-fail.
Procedure
- Type coating rejects and batches.
- Read reject %.
- Chase spray weight / cure hold when reject % is material.
Failure modes
- Inventing reject %.
- Dumping a Vitaquest coat-pan unit log into NutraScience fields.
- Folding particle-size misses into coating rejects.
Worked example
None on this page yet. When one lands it will be a real case: what broke, the number, and what changed. Not a composite.
Glossary
- Coating-reject rate %
- Coating rejects ÷ Batches × 100.
Work with us — We run this job on your accounts. Services
FAQ
- Is this Vitaquest coating-reject rate?
- Different CMO plant book. [Coating-reject rate](/manuals/vitaquest-coating-reject-rate) reads Vitaquest coat-pan units. Here you tally NutraScience coated lots that failed release.
- Is this particle-size fail rate?
- Sibling NutraScience test. [Particle-size fail rate](/manuals/nutrascience-particle-size-fail-rate) is sieve / laser misses. This page is coating rejects ÷ lots coated.
- What reject % should I invent?
- None. Tally coating rejects and lots coated from the same NutraScience QC cut.